The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Boog** · 06-16-2018, 03:42 PM

If you mean the L shaped step support bracket it bolts to the cross sill number 14 in the diagram. If you mean the fender brace set number 7 in the diagram those are just for the fender. A step brace not shown is one that is threaded on one end that goes through a hole in the frame and attaches to the lower front of the fender where the step attaches to it. I don't think LMC offers it.
Here is the LMC catalog diagram and a couple pics from under my original 69 stepper.

06-16-2018, 03:42 PM	#2
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 12,997	Re: stepside step bracket photo If you mean the L shaped step support bracket it bolts to the cross sill number 14 in the diagram. If you mean the fender brace set number 7 in the diagram those are just for the fender. A step brace not shown is one that is threaded on one end that goes through a hole in the frame and attaches to the lower front of the fender where the step attaches to it. I don't think LMC offers it. Here is the LMC catalog diagram and a couple pics from under my original 69 stepper. Attached Images __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross