The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 68 C10 Yellow wire from firewall to starter/coil.

**'68OrangeSunshine** · 10-19-2019, 11:50 PM

NAPA has Packard connectors. Tap into the other blade in IGN UNFUSED if it's clear.
The connector in your pic [Dan] is specific to the BATT+ terminal of a GM HEI. It has a little ''Mohawk'' ridge to prevent its use elsewhere.

dmjlambert's pic has the right stuff.

Fuse size is roughly 1/4'' x 1''. Auto parts store should still carry them or Ace Hardware.
I believe they were called AGC type.

10-19-2019, 11:50 PM	#69
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,078	Re: 68 C10 Yellow wire from firewall to starter/coil. NAPA has Packard connectors. Tap into the other blade in IGN UNFUSED if it's clear. The connector in your pic [Dan] is specific to the BATT+ terminal of a GM HEI. It has a little ''Mohawk'' ridge to prevent its use elsewhere. dmjlambert's pic has the right stuff. Fuse size is roughly 1/4'' x 1''. Auto parts store should still carry them or Ace Hardware. I believe they were called AGC type. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.