[OKGMC4]

Got some engine and coil covers from BH Custom Designs and I'm happy with them. They are pretty fancy and well made.The only downer is that the top cover rear bolt hole doesn't line up with anything on the rear of my 99 intake. Maybe other years are different. Easy fix to drill another hole, but still.

Don't know if any one has thought of this but there is no provision for the oil cap. That means to fill oil you have to remove the top cover so you can remove a coil cover so you can fill it up.

The one change i may make is that the covers use aluminum tube spacers to hold them off the intake and valve covers. The problem here is trying to hold the tubes in place while starting bolts. I think I'll tack weld some steel tube under there to make the install easier.

Another observation is that the engine has to be pretty far forward to clear the firewall. These things have a pretty big footprint. I ended up with V8 engine brackets in the forward holes and the ebay adapter plates on the block in the front holes(which pushes the engine back some). I had the engine about 3 inches back with 6 cyl brackets before but making it pretty won over maximum engine setback. To be honest, It doesn't sit any farther forward than a stock 350 does in these trucks.

Sorry the pics didn't turn out any better.