I found a 6.0 out of a 2003 Cadillac Escalade. The engine was filthy, but when I took the
oil pan off to check it out, the bearings and cylinder walls were in good shape. I decided to
get the block hot tanked and cleaned. So I could just rebuild it. I also had the crank cleaned and polished.
The engine has a stock bottom end with with new pistons, sloppy stage 2 cam, 243 heads,
harden push rods, PAC-1219 springs, and stock rocker arms with a Trunion kit
On the top I'm using an LS6 intake manifold, Slightly Modified Stock Truck Alternator
and Power Steering Bracket, 2002 Camaro Water pump with 3/4 spacers, Idler pulley
relocation bracket, and 2002 Camaro Belt Tensioner, and a Billet Fuel Rail kit. Steering Bracket
, 2002 Camaro Water pump with 3/4 spacers, Idler pulley relocation bracket, and 2002 Camaro
Belt Tensioner, and a Billet Fuel Rail kit.