The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68gmsee · 12-27-2011, 01:41 PM

Also, make sure the cable from the battery is not corroded on the ends. If they're old cables, the break is internally at the connectors and not visible to the eye.

One question. What was the original problem? If the starter was dragging or not engaging properly, you may still have a problem with the rotor or drive asm.

12-27-2011, 01:41 PM	#4
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: 69 C10 starting issue Also, make sure the cable from the battery is not corroded on the ends. If they're old cables, the break is internally at the connectors and not visible to the eye. One question. What was the original problem? If the starter was dragging or not engaging properly, you may still have a problem with the rotor or drive asm.