The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project: Overkill (1998 GMC SAS3500 on 40's)

Devillusion · 12-09-2011, 01:33 PM

Got the rims n tires back today from the tire shop, mounted (without a scratch I might add (whew!), and powder balanced. Trimmed the center caps down to bring them closer to the wheel so they don't stick out so far anymore, cut down the bolts and threaded up the shaft a bit further as well to keep them tight to the wheel. Needs a bit more lift IMO.....but I hate the stuffed look. Trimmed out the hole in the front ones for access to the locking hubs.

12-09-2011, 01:33 PM	#11
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: Project: Overkill (1998 GMC SAS3500 on 40's) Got the rims n tires back today from the tire shop, mounted (without a scratch I might add (whew!), and powder balanced. Trimmed the center caps down to bring them closer to the wheel so they don't stick out so far anymore, cut down the bolts and threaded up the shaft a bit further as well to keep them tight to the wheel. Needs a bit more lift IMO.....but I hate the stuffed look. Trimmed out the hole in the front ones for access to the locking hubs. __________________ 1967 K30 4x4/12v Cummins/getrag/D60/D70/355s 1967 GMC suburban 4x4/LS swap 5.3/4500/205/10 bolt/14 bolt full floater 1963 C10 reg cab long box 1970 Chevelle 1968 Biscayne 2dr post "...there is no excuse for what I am about to do, but dangit....it's gonna be fun!"