The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

neonlarry · 05-09-2003, 08:22 PM

MOTHERTRUCKERS if I'm not mistaken the Helwig Bar mounts on the trailing arms, you get much better leverage the way the Camero Bar mounts plus its up out of the way.

70 Longbed thats correct the rear bar from an IROC they are 15/16" the others are much smaller. You can get just about everything you need from the Camero. I chose to use Energy Suspension Greaseable Bushings and Also their End Links, just makes it that much stiffer. Take a good look at the parts in the last picture.

05-09-2003, 08:22 PM	#14
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	MOTHERTRUCKERS if I'm not mistaken the Helwig Bar mounts on the trailing arms, you get much better leverage the way the Camero Bar mounts plus its up out of the way. 70 Longbed thats correct the rear bar from an IROC they are 15/16" the others are much smaller. You can get just about everything you need from the Camero. I chose to use Energy Suspension Greaseable Bushings and Also their End Links, just makes it that much stiffer. Take a good look at the parts in the last picture. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI