Quote:
Originally Posted by Accelo
I was under the impression the big impediment to using the Corvette pedal was you needed the Corvette TAC module to make it work. These are out of stock from GM and with only used ones available the price is about $400 each. This only applies to the Red and Blue connected computer. Later computers have the DBW built in. Maybe I am incorrect here. If someone has this setup working let me know. I went with a manual TB just to avoid this TAC pricing issue.
The down side of using a DBC is more complicated to get cruise control working than with a DBW setup.
Rick
|
You have to be very careful with the pedals, you can't interchange them freely. The pedal "should" match the throttle body. With that being said, the 2005+ corvette pedal work with the GenIV Gold throttle bodies. GEN IV motors don't have separate TAC modules, it's built into the ECM. What year of motor do you have and what did it come out of?
EDIT: I found one on this site for $90:
https://www.corvettemods.com/C6-Corv...iABEgKhofD_BwE