Quote:
Originally Posted by nvrdone
first, id never go used parts on steering. Having said that, I did the change over to modern tie rod ends. I used the stock '49 pitman arm by grinding off the ball stud from the back & knocking it out with a big hammer. No cost there. the tie rod ends were for a Jeep - dorman # 920538 (2) and 921317 (2) the tie rod and drag link were made up by a local Jeep off road shop. Cost me all of $125.00 for all parts & labor.
|
I have everything apart EXCEPT the ball on the pitman, and the ball on the driver's side link. I have been beating on them and they WILL NOT MOVE!
I have the drag link built and new tie rod/ends, all I need it the pitman and that link!