The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - turbo 350 tranny rebuild got 3 quotes need your input ?

67Blacksheep · 03-22-2002, 04:30 PM

Case bt-
Hard to tell with Trans shops. i agree with the rude comment, but check around for every option. I recently had a 400 Turbo re-worked for me, I did the removal and install myself. He installed a high end shift kit, ordered me a new 2800 stall. I gave him $300.00, and the trans is tight as can be. The removal is Very easy, if you have a floor jack and some determination it only takes about 1/2 to drop one. Before you spend $600.00, you may want to check out the rebuilt 350s offered by Autozone and Advanced. For around the same $$ you can have a warranty and an almost new unit. Good luck!!!

------------------

03-22-2002, 04:30 PM	#10
67Blacksheep Registered User Join Date: Mar 2002 Location: Ohio Posts: 135	Case bt- Hard to tell with Trans shops. i agree with the rude comment, but check around for every option. I recently had a 400 Turbo re-worked for me, I did the removal and install myself. He installed a high end shift kit, ordered me a new 2800 stall. I gave him $300.00, and the trans is tight as can be. The removal is Very easy, if you have a floor jack and some determination it only takes about 1/2 to drop one. Before you spend $600.00, you may want to check out the rebuilt 350s offered by Autozone and Advanced. For around the same $$ you can have a warranty and an almost new unit. Good luck!!! ------------------ __________________ '94 GMC Seirra Ext. Cab '67 Formula Firebird '89 GSX-R 750