Quote:
Originally Posted by notsolo
I have not seen the Fiji, turbine, but that sounds very promising...touch up gun would be good choice also. Many Youtube clips on painting, I still box my paint....add reducer and pour from 1 cup to another.....practice with it and get your work piece at a good level...hang it if you can. .....some of the TCP Global bright colors work best with a light base coat of silver....I used the TCP...UMB.....on my Blazer, complete color coat of silver then 3 coats of lime, 5 coats of clear.
|
I bought the turbine because I live in Indiana and getting the compressed air dry enough to work well is very expensive. Also the Fuji is portable and uses 9.5 PSI so little overspray and stirring up dust. I don't have a booth. I was going to use 2K epoxy but I have self etching also. If self etching is too thick or too soon are there acid residue problems?