[67cheby]

Originally Posted by Xeen

Hey all;
I ordered my fuel line fittings and clips today.
I decided to use 3/8" to -6 AN Tube Nuts and run 3/8" steel lines for both my supply and return lines.
This will allow me to use a simple 37 degree flare on a steel line, and save a ton of money over a braded hose setup with the added bonus that it will be more robust over time.
It took me quite a bit of research and time to figure this out and hopefully this will save someone some time in the future.
Here are the fittings I used with links.

GM 3/8" female spring lock to male -6 AN. http://www.summitracing.com/parts/rus-640850
GM 5/16 female spring lock to male -6 AN. http://www.summitracing.com/parts/rus-640860
Tube Nut 3/8" to female -6 AN. http://www.summitracing.com/parts/sum-220633-2
Tube Sleeve 3/8" to -6 AN. http://www.summitracing.com/parts/sum-220634-2

Hey man, thanks for all the part #s any other tips for us on the plumbing side ?