|
Re: Gathering parts for front disc brakes for 1969
Quote:
Originally Posted by dmjlambert
The fit feels fine. It is tight enough to require a separator tool to pop the threaded post out of the hole. When the nut it tight it has about 1/4 inch more of threads that it could turn onto if the spindle was thinner. I am thinking everything is fine except the hole for the cotter pin will not place the cotter pin well inside a notch of the nut. When it is tight I was not able to insert a cotter pin without lining up a notch on the hole. So we are not talking a great amount of added thickness of the spindle needed.
|
One grade 8 flat washer should work.
__________________
Michael of the clan Hill,
"Two Seventy Two's"
71 1-ton Dually 350 4-Speed
71 C/50 Grain Truck, 350 Split-Axle 4-Speed
02 3/4 ton Express
14 Indian Chief Vintage
1952 Ford 8N, "Only Ford Allowed On The Property" 
"Be American, Buy American" 
|