The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Best cam for a stock 350 crate w/ edelbrock preformer intake and holly 600 carb

ManNamedJed · 02-05-2020, 04:22 PM

I have the Summit 1102 in my Goodwrench 350. It made a nice improvement in how it revs, and now pulls up to 5000 where before it seemed to fall off at 3000. It certainly added some torque in the 2000-4000rpm range.

However it was not a very big improvement. I wish I'd gone a bit more aggressive. I'd gone too big in cam in the past and hated how it drove (and didn't get along with the stock heads), so I was pretty conservative this time.

I'd suggest the Summit 1103. Word is it gives a touch of lope, which would be cool. It also supposedly plays well with Chevy TBI systems.

FTI - I have 2.5" Rams Horn manifolds, Edelbrock 1406, and a Performer EPS manifold.

02-05-2020, 04:22 PM	#22
ManNamedJed Registered User Join Date: May 2018 Location: Reno, NV Posts: 232	Re: Best cam for a stock 350 crate w/ edelbrock preformer intake and holly 600 carb I have the Summit 1102 in my Goodwrench 350. It made a nice improvement in how it revs, and now pulls up to 5000 where before it seemed to fall off at 3000. It certainly added some torque in the 2000-4000rpm range. However it was not a very big improvement. I wish I'd gone a bit more aggressive. I'd gone too big in cam in the past and hated how it drove (and didn't get along with the stock heads), so I was pretty conservative this time. I'd suggest the Summit 1103. Word is it gives a touch of lope, which would be cool. It also supposedly plays well with Chevy TBI systems. FTI - I have 2.5" Rams Horn manifolds, Edelbrock 1406, and a Performer EPS manifold.