[marvgarr68]

Well I have started working on it again. I also changed it up a little. I'm going full electronic injection on it. I already had the electronic IP and all the sensors. I cut a wiring harness out of a 94 6.5 truck. I then sorted through all the wiring this took time labeled all of it. I got the ECU from a 94 truck also. I made a glove box out of diamond plate aluminum and mounted the ECU in there. I also mounted the auxiliary fuse blocks and relays and also the diagnostic plug. I cut the harness down soldered all connections and shrink wrapped them. I got a military 50 pin circular socket and plug and mounted it on the firewall. There is a guy that makes up to a 6 position chip for the 6.5 this is what I'm going with. I will have cruise control, idle up control, and greater reliability. This way the IP isn't maxed all the time which is hard on it. Here are some pics.