Kinda hard to see but my wires are going about middle of the door spaced about three inches offset higher on the cab. I have the rubberized corrugated rubber wiring sheath covering my wires. Not the plastic for under hood. I also used the clips from the speakers that are supposed to go on the door and put them on the speakers so I could screw them to the door so they would be flush. The carpet door mat has a card board backing that muffles the speakers so I drilled holes 1/4" apart over the whole surface of the cardboard. Not all the way through but just until it hit the carpet. The carpet is glued to it so you don't want to get carried away
