Couple other things the Paintman has been futzin around with is the supply lines for the heated manifold. After much banter over on inliners.org I decided to do it like this.............
water supply from block
[/URL]
Water return to Tstat housing
[/URL]
[/URL]
Started doing some of the ground wires. I have one ground (2 guage) running from each side of the motor to spuds i welded to the motor perches. And another one from the tranny (0 gauge) to the frame.
[/URL]
Kind of hard to see it here but it bolts to the block just to the left of the Alt bracket runs under to the motor perch.
[/URL]
And then one big honking ground wire from the tranny to another spud welded to the frame.
[/URL]
Next on the list is hitting the inside of the cab with some insulation. I decided to go with FatMat. Nice thing about being a painter is you also have all the tools for hanging paper. It's great working on my papering table with a nice long straight edge for cutting. Finally something I can do on this truck that I actually know what I am doing! Yea me!
[/URL]