The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

First c10 · 04-12-2019, 01:23 PM

I picked up a 7/16" to 10mm AC adapter fitting (in the middle)for the GM refrigerant sensor(on the right) for the ECM to see the AC. I also picked up a binary switch (on the left)because I ordered a trinary switch when I ordered the system years ago.

I was able to get them installed and wired up. Now time to pull a vacuum on the system and check for leaks.

04-12-2019, 01:23 PM	#824
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" I picked up a 7/16" to 10mm AC adapter fitting (in the middle)for the GM refrigerant sensor(on the right) for the ECM to see the AC. I also picked up a binary switch (on the left)because I ordered a trinary switch when I ordered the system years ago. I was able to get them installed and wired up. Now time to pull a vacuum on the system and check for leaks. Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!