|
Re: Drop spindle ?
Quote:
Originally Posted by BIG ORANGE
Don't mean to interrupt but I have a question concerning lowering, I have ECE drop spindles on my blazer, I have a set of 2inch drop springs coming in this week that I'm installing, ok here's the question. Should I purchase some drop shocks w that spring and will I need to maybe cut some off the bump stop on the upper control arm. I've never ran a short spring w the drop spindles, I've always just ran the drop spindles with stock shock.
Thanks guys
|
You can test it out w/the stock shocks as it will be close.
I'd put things together & measure the distance between the upper & lower mounts to 'know' that dimension. You can also measure your stock shock @ full extension & fully compressed. The math between the 3 dimensions will provide insight. It's pretty common that stock shock length usually works w/a cut-coil which is similar to a 2" drop spring.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|