[eodbeast]

Originally Posted by Jake Wade

Try changing your oil, use a good Wix 51061 oil filter (NAPA 1061) and some Valvoline VR1 30wt racing oil in silver bottle (plenty of ZINC)

http://www.valvoline.com/products/co...ng-motor-oil/6

Changed filter and oil to VR1 10W30...no change in the noise. Not much of anything to speak of as far as metal particles in the oil. Just a few speckles here and there; about what you'd expect in the first 800 miles after break-in (changed the oil immediately after break-in, final valve adjustment and timing dialed in). Certainly nothing indicating wiped cam lobes.