|
Re: 1999 Trans Am 5.7 6 speed
Quote:
Originally Posted by jjzepplin
I am going to need some help on this one guys. Oh it had a new clutch for sure and a B and M shifter. One broken exhaust manifold bolt busted flush with the manifold so some is sticking out of the head. Might be able to get it.
|
I like ARP bolts in this instance for replacements. If the the bolt is busted flush you might be able to start a hole with a Dremel tool and then use a reverse twist drill bit spinning clockwise in the drill and it will spin right out. That procedure worked for me. A Dremel tool is one tool I really like a lot. It was a lot easier to use a small grinding bit to center a hole for the reverse drill bit I used.
__________________
1989 K1500 Chev. EC
Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit.
2009 Hummer H3T 3.7L 5M (sold)
1997 K2500 Chev. EC 7.4L/ 4L80E
2018 Dodge Ram 2500 HD R/C
|