[Tempest67]

Hi Guys

Well the floor work continues, I will update later, but have a question about seam sealer, and how much the factory used?

The pics below are of the seam between the rear floor pan and the 'arch' going over the rear axle. You can see in the first pic how much was caked in there, and then I scraped it off and you can see in the 2nd pic the screw driver showing the thickness.

The 3rd pic is the seam with all the sealer removed

Do you that was original? or do you think someone added that? as it is almost 1/2 inch thick?

Just curious, and Thanks for your thoughts