[RThree]

Well today the we took and mounted the 4x4 hangers and pretty much fixed the rear ride hight problem it might need just a little 1 inch block to totally level out as the front is still a little high with my 292 6 cylinder. It should settle into a perfect stance with the 454 when i get that worked out.

So we torched off the rivets, cleaned off the frame of the undercoating and drilled the new holes. I will be doing a bed off restore of the rear eventually so its not as pretty as i would like but that will come later.

We also worked on moving the engine and transmission forward by an inch so when i do get my 454 ready to install we will have enough clearance for the distributer cap and will be able to bolt it right onto the transmission.