The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Pre-Start Concerns... Gen 5 sat dormant for 3+ years

TA_C10 · 11-22-2019, 12:29 PM

Never seen your truck cornerstone, very cool man. Always wondered why no build thread. Fire it up!

When I fired up my engine for the first time I had the pcv system connected and I also accidentally left an open vacuum port from evap so when it fired it revved like it was ready for nascar race.... When I broke the intake back down later on I found fresh oil all inside the intake and the pcv valve was pretty buttery too. I am definitely thinking of using a catch can after seeing this happen only running for 30 seconds.... I think the pcv valve was bad so I replaced it too and that may have been the bigger issue but still...

Let me know what kind of catch can you go with cornerstone.

11-22-2019, 12:29 PM	#11
TA_C10 Registered User Join Date: Jun 2018 Location: Texas Posts: 1,353	Re: Pre-Start Concerns... Gen 5 sat dormant for 3+ years Never seen your truck cornerstone, very cool man. Always wondered why no build thread. Fire it up! When I fired up my engine for the first time I had the pcv system connected and I also accidentally left an open vacuum port from evap so when it fired it revved like it was ready for nascar race.... When I broke the intake back down later on I found fresh oil all inside the intake and the pcv valve was pretty buttery too. I am definitely thinking of using a catch can after seeing this happen only running for 30 seconds.... I think the pcv valve was bad so I replaced it too and that may have been the bigger issue but still... Let me know what kind of catch can you go with cornerstone. __________________ TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money".