|
Re: Pre-Start Concerns... Gen 5 sat dormant for 3+ years
Quote:
Originally Posted by sprint_9
Goes between these two : Port down by the water pump is the vacuum side of the pcv system, it connects to the port on the intake you have circled.
I just used 3/8 fuel line rated for some vacuum and a spring clamp on the barb. No need to go crazy on the clamp either as the barbs are plastic.
I can snap some pictures when I get home tonight too.
|
Thanks again sir, but no need to do that. I went back and looked through your build so I believe I get it now. I just need to find a decent mounting place on my set up. It appears that your can is not vented based on what I can tell in the pics. Is there any reason why some are vented and some sealed? I've been seeing a bunch today on the web, anywhere from 20 bucks on up to 300..... for a can. sheesh.
__________________
Brian
1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.
|