Re: Another L.E.D Turn Signal Problem
Some info http://www.memotronics.com/led-flashers/
Just to be clear
X=12v = power from fuse box
L=load = led
Also just to state the obvious there are 2 flashers one is turn one is haz. Try it in the hazard side. Making sure x and y are correct. The haz circ by nature has more load. In my case the strapless keep it clean would work with haz but not the turn circ. I replaced it with the ez style with ground strap and it worked.
__________________
The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride!
........................ ___
.........________//__{\_____
,,,,,,,/__(⊙)___//___/__(O)_/
@disciple2.rc 💪instagram💪
LED TAILS
|