The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Dale99 · 07-03-2013, 05:36 PM

Correct on wheel spacers. They were 1". The trick was finding some with SAE threads. I should have the receipt somewhere. Will try to dig it out. Also, the lugs on the truck had to be slightly cut down. So if you dont want to do that, I would try a 1.25 spacer.

:edit: Quick search, i think this is the site I got them from. http://www.wheel-spacers.com/6x55-6x...m-Hub-P53.aspx

07-03-2013, 05:36 PM	#155
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Project 30 years sitting Correct on wheel spacers. They were 1". The trick was finding some with SAE threads. I should have the receipt somewhere. Will try to dig it out. Also, the lugs on the truck had to be slightly cut down. So if you dont want to do that, I would try a 1.25 spacer. :edit: Quick search, i think this is the site I got them from. http://www.wheel-spacers.com/6x55-6x...m-Hub-P53.aspx Last edited by Dale99; 07-03-2013 at 05:41 PM.