10) In one of the other post, I tacked a temporary bracket for the Panhard bar. I finally got around to putting in on. I have done this design many times. Its always worked good for me. I just have one more gusset to put in.
I’m sorry that the pictures aren’t that great.
The other thing I did was box the frame were I tied it back together. I used some .125 plate (Mild Steel) nothing special.
The factory S-10 frame is boxed so it is a little wider than the 47 frame. So I made the outside edge flush then put a plate to cover the opening on the inside.
I’ll get some better Pictures of the frame when I pull the body off .