The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

hvacfatboy · 10-14-2019, 09:33 PM

I need to know what needs to be done to get the drive shaft to not hit the trailing arm cross member. I have a 72 2wd Blazer that i am putting a 6.0L LS motor with the msd box and a carb instead of fuel injection, my problem is that the tail shaft of the trans is very close to the trailing arm crossmember. I need any ideas to get the motor and trans lower. Thanks in advance for any help and info.

10-14-2019, 09:33 PM	#1
hvacfatboy Registered User Join Date: Oct 2011 Location: Timberlake NC Posts: 397	I need info on a ls 6.0l & 700r4 trans I need to know what needs to be done to get the drive shaft to not hit the trailing arm cross member. I have a 72 2wd Blazer that i am putting a 6.0L LS motor with the msd box and a carb instead of fuel injection, my problem is that the tail shaft of the trans is very close to the trailing arm crossmember. I need any ideas to get the motor and trans lower. Thanks in advance for any help and info.