I just crawled under the blazer in the above picture and took some installed shots laying on my back looking up. The rods you need could also be bent out of new rod if needed. I have measurements for that as well.
1st pic is the cable coming from the pedal to the triangular bracket riveted to the frame on drivers side
2nd pic is of passenger side where the long 5/16" diameter rod hooks to frame and cable as well as one of the smaller 3/16" diameter rods further to the rear towards the axle. There is a 2nd small rod on the driver side cable as well.
3rd pic shows the tensioner with the spring to the body. The tensioner is actually part of the cable that comes from the pedal on the Blazers
4th pic I took the wire tie off the extra set I have and laid them out so you could see them better.
5th pic is a further away shot of the spare set
__________________
Members I have met.
Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb
https://paypal.me/6772GMtruckparts
Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.