The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Pontiac1976 · 05-27-2020, 10:56 AM

https://www.youtube.com/watch?v=QwLp4-RrI-Q
https://www.youtube.com/watch?v=m4kh13e--6E
So True not your plug and easy play. lol some wiring needed.
But you could pay to have the some one to scan your plug and the back of the cluster and make a 3D print of it then the female end would be done for all the after market gauge packs. you still have to re-pin the new female connector for you set up to match your truck wiring. So in this case it save your wiring but more work money time. Because there is too many difference between 73-90 gauges option(motors too) you may want. So you still going to have to wiring pining 1 or 2 connectors.

05-27-2020, 10:56 AM	#6
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 750	Re: Female Electrical Plug? https://www.youtube.com/watch?v=QwLp4-RrI-Q https://www.youtube.com/watch?v=m4kh13e--6E So True not your plug and easy play. lol some wiring needed. But you could pay to have the some one to scan your plug and the back of the cluster and make a 3D print of it then the female end would be done for all the after market gauge packs. you still have to re-pin the new female connector for you set up to match your truck wiring. So in this case it save your wiring but more work money time. Because there is too many difference between 73-90 gauges option(motors too) you may want. So you still going to have to wiring pining 1 or 2 connectors. __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.