[Rust-O-Matic]

Here's a quick recap of how this went and a few pics.

I've included a pic of all the parts I replaced with their numbers visible on the boxes. Not pictured were also a pair of calipers from Carquest, and a pair of Dorman speed bleeders, which I think were #12701. The calipers came with new slider bolts, so I didn't end up using the ones in the pic. The black box with the X through it is an unrelated box of brake hose clips from a different project. Not sure how that got mixed in.

1. Lift up the truck and remove hideous '90s wheels.

2. Marvel at how crusty the existing parts are.

3. Remove caliper slider bolts (3/8" allen) and caliper.

4. Remove (6) drive flange bolts.