The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

lowbuck · 04-26-2017, 08:00 PM

Is there a easy way of removing the bottom 3/4" bolts from the trans. I can't get a socket into the space between the lower trans bolt and the pressure plate.I also tried a box end wrench with no luck. It looks like the trans cross member is non removable as well. Will I have to remove the trans and bell-housing as a unit? My suburban is a stock V8 with the SM- 4 speed trans with no modifications. Thanks for any help or suggestions.

04-26-2017, 08:00 PM	#1
lowbuck Registered User Join Date: Sep 2014 Location: Nanaimo B.C. wet coast of Canada Posts: 70	1965 suburban trans Is there a easy way of removing the bottom 3/4" bolts from the trans. I can't get a socket into the space between the lower trans bolt and the pressure plate.I also tried a box end wrench with no luck. It looks like the trans cross member is non removable as well. Will I have to remove the trans and bell-housing as a unit? My suburban is a stock V8 with the SM- 4 speed trans with no modifications. Thanks for any help or suggestions.