The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68 C-10 KID · 12-12-2018, 07:12 PM

I have a few questions on these anti roll bars. I would like to install one on my '68 LWB
The question's I have is?
A) size 1-1/2" or 2''
B) mounting location? is okay to mount in front of axle and connect the down rods to the trailing arms? (Moser truck arms)
C) mount on top, inside or bottom of frame

things I know is it has to be the spline type.
weight 3882lbs w/ me and 10gal of fuel.
rear 1750lbs
HP 680's at fly wheel
leaving @ 3600 on the break
If you guys could pass along some knowledge that be great.
Thanks

12-12-2018, 07:12 PM	#5
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: Anti roll bar??? I have a few questions on these anti roll bars. I would like to install one on my '68 LWB The question's I have is? A) size 1-1/2" or 2'' B) mounting location? is okay to mount in front of axle and connect the down rods to the trailing arms? (Moser truck arms) C) mount on top, inside or bottom of frame things I know is it has to be the spline type. weight 3882lbs w/ me and 10gal of fuel. rear 1750lbs HP 680's at fly wheel leaving @ 3600 on the break If you guys could pass along some knowledge that be great. Thanks __________________ 427 SBC 683HP & 590ftlbsTRQ @ fly wheel. 60'-1.38 1/4-10.43 MPH-124.6 New ET current 4/2019 AKA MEAN GREEN.