11-22-2019, 11:58 PM
|
#13
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Learning to weld all over...
Quote:
Originally Posted by davischevy
Andy, you are a braver man than me. My welds are so bad, no way would I take a picture of them.  |
A grinder does wonders!
I had my buddy who is retired welder instructor come over and set the machine up for me. We then welded up the passenger side rocker and cab corner. Not bad at all once he got the machine right. The door lines up almost perfect. I'm just a tad off at the back but for the first time I take it.
Drivers side may be a different story though.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71 
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|
|
|