[rideair]

Edahall,

The way I did is the following:

Roll the window down, take the bolt out at the bottom that holds the window channel in place between the roll down and fixed window (I thinks it a 5/16 bolt like all the other ones on the door), that will allow you to tilt the center channel by pulling it loose from the fixed window, then pull the fixed window out from the door giving you more room to work. Then work the center channel out of the door, then slide the main window off the rollers and bring it out the top.

FYI, Getting the center channel out can be a b*tch, you will fight it and then out of no where, it just comes out and you'll say to yourself, "How did I do it?"

Make Sense?