View Single Post
Old 07-06-2020, 07:45 PM   #291
28TudorAZ
Registered User
 
28TudorAZ's Avatar
 
Join Date: May 2018
Location: Phoenix, AZ
Posts: 315
Re: Starting a 52 Chevy 3100 Project.

Quote:
Originally Posted by twinshadows View Post
Hi 28Tudor . . . . 1st off - - - a Very Nice Truck .
Great build from start to Driving ; and for one of the best "Causes"...…
your Dad , good on you.

Ok . . . this is just info : I have installed all LED lights on my
Nova ; installed a 'NAPA flasher # 262 , it made my lights work.
But, they would flash 'kinda slow' . . . then, I found this Flasher :
….. AUDEW LED flasher (and its adjustable - rate)

https://www.amazon.com/dp/B011BTMDQM...novasitecon-20

(better that adding 'load resistors' , to your lights) . . . and, for my LED's
it solved my issue - - - could work for you also, and may be just that simple , as changing your flasher (instead of messing with your wires).
Then, it's cheap enough . . . (was # 12.00 , when I bought it).
Here's my point - - - works great - - - and, I never adjusted a thing
just install . . . like 2 years ago . (I like things that work as
advertised) .
again , very nice truck & . . . . . MAN, it was HOT in Scottsdale on th'
4th . . . . Have a nice day & stay safe …………….

jim
Thanks!!! As far as the flasher it works great with the wires switched. I would assume it would still have the same issue with an adjustable one. I will probably just swap the wires at some point but thanks for the info.

On another note I took it to be aligned today. They said it was near perfect and did not need to be aligned and did not charge me. I aligned it with a tape measure. The did say the idler arm is bad though. It is brand new so I guess I will be swapping that out.
__________________
Project "Eagle Spirit" 52 Chevy http://67-72chevytrucks.com/vboard/s...d.php?t=763085

Project "LS Scout" https://67-72chevytrucks.com/vboard/...d.php?t=844133
28TudorAZ is offline   Reply With Quote