Made some good progress today.
Installed the brace for the booster, was able to bend it enough to get a 1-1/4" bolt on it, then ratcheted it in position.
Bled the brake M/C while it was mounted on the booster.
Installed the rest of the brake lines, which along with the proportioning valave was a royal PITA.
Mounted the tilt steering column. Still have some adjustments to make. The column is turned a bit too much to the right for starters. I also forgot to install the half ring piece that holds the column in place.
I started to install the Lokar shift linkage, but I might need to cut the rod. Had to call it a day to take care of some other stuff. If I could get the column rotated left, I might not need to cut the rod.