The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TA_C10 · 03-03-2019, 11:08 PM

Rear Glass Channel/Frame Repair

The rear glass channel had rusted out some in couple spots luckily in only one section. I used a single piece of steel instead of 2 sheets butted together so hopefully that won't be an issue... I welded both sides of channel, inside and outside of cab. I didn't worry about grinding it down too much since it will be hidden under the seal.

This concludes the metal work on the cab for now!!! I can now take the cab back off and seal and paint the bottom. Then I will return the cab to the frame.

03-03-2019, 11:08 PM	#119
TA_C10 Registered User Join Date: Jun 2018 Location: Texas Posts: 1,353	Re: TA_C10: Stage 1 Rear Glass Channel/Frame Repair The rear glass channel had rusted out some in couple spots luckily in only one section. I used a single piece of steel instead of 2 sheets butted together so hopefully that won't be an issue... I welded both sides of channel, inside and outside of cab. I didn't worry about grinding it down too much since it will be hidden under the seal. This concludes the metal work on the cab for now!!! I can now take the cab back off and seal and paint the bottom. Then I will return the cab to the frame. __________________ TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money".