[davischevy]

Fusor ® 100EZ/101EZ or Fusor ® 120/T20/T21.

I like the heat set because when you get it where you want it, you can set it with heat.

I've never used the faster set ones, because I'm not fast.

The stuff is very expensive, and it mixes in a 4" mixing nozzle, so have all your work ready when you start spreading. Also get extra nozzles.

Some idiot at a show leaned on the hood on my Corvette and punched the hood brace all the way through the inner structure. I cut out a section of the inner structure, and laid fiberglass mat mixed with Fusor then laid the cutout back on and filled the imperfections. After sanding, it was stronger than new.

I put white lithium grease on the bolt threads and screwed them in the holes for the brace. The bolts made it easier to handle the cutout also.