03-07-2013, 06:38 AM
|
#49
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Anyone: Delco Pleasur-lift air shocks w POWER PAC compressor?
Quote:
Originally Posted by DeadheadNM
Too cool!!!! Congrats! I was about to PM ya' to see how things were coming along. When possible I'd like to see a larger field of view pic of your dash with the mounted controller. Any advice you can share on the fittings would be appreciated. Pete
|
The rear fittings of the guage and knob were the trouble ones. They are 3/16" and no one has them. I ended up doing a 3/16" union with 3/16" brake line with the 1/4" rubber hose with clamps on it. I just closed off the other side with a cap fitting. The rest was easy it all just went right together.
One major big change was the Park Ave compressor wouldn't even put pressure on the line so I ended up putting a cheap 12 volt compressor I had under the truck. It's noisy but it works. I may end up buying a compressor later though. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|
|
|