Re: New 383 Build
A stock-type oil pump is fine for a 383. What's happened in the last few years is that to reduce costs, the "over the counter" type pump castings have become thinner and thinner and cracks started being reported during high-performance use. It's smart now to invest in one of the Melling Select pumps which is a standard cast-iron pump, but just a heavier casting. They're still pretty cheap - around $85 for the pump and steel intermediate rod.
The NAPA MV-55 stock pumps now come with a little sheet of paper that states "NOT FOR HIGH-PERFORMANCE USE".
As for the high-volume, high-pressure stuff I'll stay off my soapbox and just note they are not only not needed, they actively suck horsepower and cause problems long-term.
Last edited by Ticker; 07-02-2010 at 04:10 PM.
|