ok man,i went over today before i saw your post.i got a few pics if they dont work for you i will get more.what i did was simple.cut the center cross out,..the 4 missing sections where the cross meets the sides and top i simply welded in pieces i cut from the cross piece.bought a billet grill for a 73-83 then laid it on top of the 67 grill.traced looking down around the headlight buckets and used a cut off wheel to cut it out.then used a press to get the right bend i needed.hope this helps
Quote:
Originally Posted by yunkyarddog
where the grill meets the light buckets and top & bottom just wanna see how you made it work
THIS IS BY FAR THE BEST LOOKIN GRILL FOR GMC PICKUPS BYFAR IMO IT SHOULD HAVE BEEN STOCK
|