|
Re: Parking Brake Handle Install
A heat gun would work watch the heat do not use to much, slip it on do not to far.
To help with that mark the rod with masking tape how far the rod will go in so you do not push pass that point.
Then leave it till it cools give extra time before you try pulling the handle for the first time.
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|