|
Re: Fluid pouring out of TH350 when vacuum modulaor removed, hard time getting into 3
The governor is not your problem. If it was the transmission would not upshift at all. The vacuum modulator or a cracked hose causing a vacuum leak going to it is what I would suspect. I had the same problem with a TH400, and this is what I was told. Turned out I had a brittle spot in the line and it was cracked, causing a slight vacuum leak. Replaced the line, problem solved.
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed.
1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck.
RIP ElJay
RIP 67ChevyRedneck
RIP Grumpy Old Man
|