|
Re: Will these wheels fit?
Try taking used cardboard big enough cover your hub on the spindle lightly tap so the lugs in boss the card board cut out the in bosses in the out area of the mounting face, take that with you. Place on the wheel line up the holes if it does not line up with all the hole that rim will not work.
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|