The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mbzaungst · 12-17-2018, 06:41 AM

Everything has been done in my brothers garage, over spray has been a problem. some cheap painters plastic is a must. Epoxy primers and urethane 2k primers from Omni used. The plan is to use BASF paints and clears, using HVLP guns. a wet floor helps with dust control and wet sanding clears has been a must as well. We have been unable to keep all dust out of the clears. Make sure to drain compressor before paint process and make sure to have good regulators and dryers inline.

12-17-2018, 06:41 AM	#12
mbzaungst Registered User Join Date: Jan 2014 Location: Wacousta, Mich Posts: 90	Re: 1972 C10 LWB Georgia Project Everything has been done in my brothers garage, over spray has been a problem. some cheap painters plastic is a must. Epoxy primers and urethane 2k primers from Omni used. The plan is to use BASF paints and clears, using HVLP guns. a wet floor helps with dust control and wet sanding clears has been a must as well. We have been unable to keep all dust out of the clears. Make sure to drain compressor before paint process and make sure to have good regulators and dryers inline.