The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

66Project · 08-05-2013, 09:36 PM

Got my second wind and started putting together the rear suspension. The rear end is out of a 72 Chevy truck with new seals and outer bearings. The rear trailing arms were cleaned up and painted. Installed new poly bushings. Air bags are the same SS7s like the front.

Used a cup bracket at the top of the air bag to bolt to the frame. I ended up taking it out and seeing what the lower looked like. After the front... I like it lower, it still has a nice rake.

I may have a problem running a track bar. The diff cover its a bit too far. Anybody run into this problem?

08-05-2013, 09:36 PM	#33
66Project Registered User Join Date: Jun 2013 Location: Nashville Posts: 82	Re: 66 C10 Project SWB Got my second wind and started putting together the rear suspension. The rear end is out of a 72 Chevy truck with new seals and outer bearings. The rear trailing arms were cleaned up and painted. Installed new poly bushings. Air bags are the same SS7s like the front. Used a cup bracket at the top of the air bag to bolt to the frame. I ended up taking it out and seeing what the lower looked like. After the front... I like it lower, it still has a nice rake. I may have a problem running a track bar. The diff cover its a bit too far. Anybody run into this problem?