The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 67-72 Tac...

Andy4639 · 03-27-2020, 09:25 PM

Not sure how many of you know this but I have been on the board since the 80's and I just found out about this part last week for our model trucks.

You can buy a brand new board to fix your factory tachometer if you have one.
They are 59.00 and have life time warranty. I just finished rebuilding mine and hooked it up to the Ramp truck to test it.
I snipped the 2 wires off of their connectors and re soldered them and it works great. You have to unsolder the 3 legs out of the old tach also. This was the hardest part for me. But once I had them out it was nothing to it.
I hate to admit it but I have thrown away 2 of these before because they quite working.

03-27-2020, 09:25 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	67-72 Tac... Not sure how many of you know this but I have been on the board since the 80's and I just found out about this part last week for our model trucks. You can buy a brand new board to fix your factory tachometer if you have one. They are 59.00 and have life time warranty. I just finished rebuilding mine and hooked it up to the Ramp truck to test it. I snipped the 2 wires off of their connectors and re soldered them and it works great. You have to unsolder the 3 legs out of the old tach also. This was the hardest part for me. But once I had them out it was nothing to it. I hate to admit it but I have thrown away 2 of these before because they quite working. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.