[firedog]

Attachment 2172999

Attachment 2173000

Attachment 2173001

So I have been depending on a friend to do my welding. After a few no shows I decided it was time to bite the bullet and do my own welding. So here are the pics of my first time welding. I have both frame rails from the front of the cab to the back of the bed completed. I have welded the new frame rails to the Model A front crossmember and frame horns. I set the width on the frame rails with a makeshift frame table and lots and lots of measuring and tacked them in place for the rest of the crossmembers to be cut and welded in. It is all built out of 2x3 tubing cut with a chop saw and welded with a 110v gasless wire feed welder. I still have a lot of grinding to do but have impressed my self with how it is coming out. Hopefully it will be a rolling frame soon.